How To Write Tab

Perhaps one of the most important things to do before you start typing up a piece of TAB is to decide exactly how much information to include in it. The trick is to convey the right amount of information in a clear, easily readable form.

Questions you can ask yourself are :

• Is the song played using mostly chords ?
• Are there a number of riffs which appear throughout the song ?
• Is there a clear verse/chorus/middle bit structure ?

By planning ahead a little you should be able to produce a clearly structured TAB which will not only be easier for others to read, but also easier for you to type in.

There are also choices to be made when deciding what package to use when typing the TAB in. All you really need is a simple text editor, however a mouse-driven editor will probably make things easier.

When you start typing in it saves time if you draw out one blank stave and then make 8 or 10 copies of these before you start typing in the fret numbers etc.

If you use a more complicated package like Microsoft Word then make sure that the characters you use are all the same length. If an 'm' character is wider than an 'i' character then your TAB is going to look very strange on another text editor. Choose a font where all charcters get the same width - Courier usually does the job.

To Tab Or Not To Tab

If a song can be described well with just chords, then it will be a lot easier to read and write if you just use the chord shapes, rather than tab out the chords.

BUT - if you do just send in the chords it makes things *much* clearer if you give the chord shapes as well. For example, if you wanted to send in Led Zeps 'Gallows Pole' you could write:

(You should really have the words underneath as well, but I can't remember them at the moment !)

Now this is OK, but how many people actually know how to play Dadd4/A off the top of their heads ?

What you need to do is include some chord shapes like this :

To TAB out these chords will take a lot longer to type in, and will probably take people a lot longer to read and understand. Where a chord is based around chords like this, it makes things much easier if you just give chord shapes and names, then show where the chords go in relation to the words.

Things To Do When Writing Tabs

One of the most important considerations when typing in TAB is to make it clear and easily readable.

There are a few simple things you can do to make things work.

Use spaces !

It's amazing the difference it can make if you insert a few blank lines in the right place.  If you are used to writing the words above or below the lines of TAB make sure you leave a few lines free so that it's clear whether the words belong to the line of TAB above or below. Space out the individual lines of TAB and the whole thing will be a lot easier for others to understand.

Define the symbols you use

It would make everybody's life a lot easier if everyone used the same symbols for hammer ons, bends etc.

BUT - if you are convinced that your particular way of writing bends and slides makes much more sense than anyone else's, that's OK as long as you tell everybody what system you use. It makes very good sense to start your TAB file with a list of symbols used.

The list of most commonly used symbols is below :

when you get on to harmonics , you might see a variety of symbols used. Even in standard music notation, an accepted way of writing natural and artificial harmonics has neverbeen agreed ! However, using brackets is the standard way of writing harmonics, so a natural harmonic at the 12th fret would be :

Normal brackets () are sometimes used for grace notes or optional notes so 'pointy' brackets <> is the usual choice for harmonics.

Label bits of the TAB

It makes things a lot easier if you can see where the 'verse' and 'chorus' parts of a song are, so put a few labels in certain places to guide people through it.

Many songs will have clear 'verse' and 'chorus' structures - so you can tab out the riffs/chords or whatever for these just once, and then indicate where these are repeated. Or there maybe a couple of important riffs which are used - so TAB these out and label them 'Riff One' and 'Riff Two' - then when they come up later in the song you can just say 'repeat Riff One four times' instead of tabbing the whole thing again.

As long as it's clear which bits of TAB go with which label, you will save yourself time this way as well as making it easier to read for others.

Include Artist/album

It's useful for others to know where to find the original song, so at the beginning of each TAB include some information on the artists who recorded the original, and the album on which the song can be found.

General comments

It's also useful to include a few lines at the beginning of the TAB to explain the style of the song, or to point out important features such as alternative tunings, use of capos etc.

A few words along the lines of  "use a staccato, funky kind of strumming style for the chords, then change to a sustained feel for the lead line"  will help people to get an idea of how to approach the playing style.

Information on the type of guitar (electric/acoustic, 6 string/12 string) and effects used would be useful.

One point on the use of capos and alternative tunings :

It's a lot easier for people to understand chord names etc if they are written as though played *without* a capo. For example, if you have a D shape chord played with a capo at the 2nd fret you should write it as D major even though you will actually be fretting notes at the 4th and 5th frets.

Also - for TAB using a capo, it's standard practice to write the numbers of the frets *relative* to the position of the capo. So again, if you had a D major chord with a capo at the 2nd fret the TAB would be :

even though you actually fret the notes at the 4th and 5th frets.

It's similar with TAB for guitars tuned a semitone or tone lower than usual. If a song should be played with the guitar tuned to Eb Ab Db Gb Bb Eb, and it has this chord :

it makes things a lot easier to understand if the you call the chord 'E' rather than Eb.

That way, if you decide to play in standard tuning, you don't get confused.

Timing information

You may want to get really serious and include details giving the precise rhythm of the piece. This will involve a lot more typing, but it means all the information necessary to play the piece is given explicitly.

One way to approach this is to write a line of dashes interspersed with numbers which count the beats. So in 4-4 time, you would have :

Under this you can write a line of d's and u's to represent down and upstrokes. Here is a simple example where the rhythm is 2 crotchets (quarter notes) followed by 4 quavers (8th notes)

You could expand on this to use upper and lower case letters to indicate accents and so on. If you use this method make sure that you clearly separate the 2 lines of rhythm information from the 6 lines of TAB !!!

One other way of including timing information is to use one letter/symbol for each note type.

For example use e for 8th note (quaver), s for 16th note (semi-quaver) and so on. The letters you use may well differ depending on whether you're used to the american system of quarter notes, 8th notes etc or the english system of crotchets and quavers, but the method is the same.

(If you're not sure of the 'translations' here they are :

whole note     -  semibreve
half note      -  minim
quarter note   -  crotchet
8th note       -  quaver
16th note      -  semiquaver
32nd note      -  demisemiquaver
64th note      -  hemidemisemiquaver      

Simply write the letters above the corresponding note in the TAB. (Make sure you define which letters/symbols you use)

Here's an example of what this looks like :

This is the opening riff from the Beatles' Ticket To Ride

Here I've used q for quarter note, e for 8th note and t for triplet quarter note.

If you want to send in a TAB with rhythm information like this then it's *essential* to explain the system you use. I've seen a lot of different systems of letters and numbers of varying degrees of simplicity and readability. Whichever you choose to use, you'll have to explain all your symbols to make sure others can work out what the hell you're on about.

If you want to give a few clues as to the rhythm of the TAB, but don't want to get too involved, use of bar lines is an effective way of conveying timing information.

Simply insert a vertical line of   |'s to indicate the end of a bar. So using the national anthem example I had before, with bar lines it looks like this :

Lyrics

It's a lot easier to follow a piece of TAB when you've got at least some of the lyrics to follow, and you can match up the notes/riffs in the TAB to the lyrics.

Try to include lyrics for at least the first verse and chorus. If you're not sure of the words you can ftp cs.uwp.edu - there is a large collection of song lyrics held there.

Failing that a request to the newsgroups along the lines of

" Please mail me the lyrics to such and such so that I can make a proper job of the TAB I'm working on"

will usually get a sympathetic response.

As a final note on writing TAB I should say that whenever you post to the newsgroups ALWAYS cross post to both guitar groups, and also mail a copy to This email address is being protected from spam bots, you need Javascript enabled to view it so that it can be included in OLGA.

For more information on posting to the guitar newsgroups and OLGA see the other FAQs regularly posted to the guitar newsgroups.

Things To Avoid

Tab Wraparound

One of the most common problems in writing TAB  is text wraparound. This makes the TAB almost impossible to read but is very easily avoided.

The problem occurs when you write a line of TAB which is maybe 80 or 90 characters long. For a lot of people this is too wide for their screen, so what should be a single line of tab ends up being split onto two lines.

Here is what it looks like :

Now this will probably look pretty weird when you see it. When I wrote it, using Windows 'Notepad', it looked fine because I could fit the whole thing on one screen. For most newsreaders though, it is too long and you run into problems.

All you have to do is be careful when you type in TAB so that you the maximum width of line is say 60 characters.

I've tried to do that in this FAQ so that the maximum width is about

this much.  If you limit your TABs in the same way, you should be OK.

Of course, if TAB *does* get wrapped around the author might not realise because it looked fine on his/her screen when they wrote it. It might be worth letting them know of the problem, so they can be careful in the future.

This includes me ! If parts of this FAQ are too wide for your screen, please let me know !)

Very squashed TAB

It's amazing how easy it is to ruin an otherwise good piece of TAB by not spacing it out so that the end result is a mass of cramped TAB, explanations, labels etc.

When you finish typing up, go back through the TAB and see if you can insert a few blank lines here and there to separate verse from chorus or whatever. It really does make it a lot easier for others to read.

It might also be worth considering if you've included too much detail in the TAB. Usually this will not be the case, but I have seen a few TABs which go into great details, but are extremely off-putting to try to read because of the sheer quantity of information.

Unnecessary repetition

If a line of TAB or a particular riff is repeated a number of times then save yourself the effort, TAB it once.

It's also easier to read like this.

That's all I *think* you need to know about reading and writing TAB. If there's anything important you think I've left out or if there are bits of the FAQ which you can't understand then let me know. You can contact me at This email address is being protected from spam bots, you need Javascript enabled to view it , or This email address is being protected from spam bots, you need Javascript enabled to view it

See Also:

• How to Read Tab
• Tablature Software